Kegs washing unit

For any food industry, it is very important to preserve the quality of products for the long term. cleanliness is The key factor. metal and PET kegs are often used for storing and transporting beer In the brewing industry. The kegs washing unit (KWU) is intended to solve the problem of maintaining cleanliness inside them.

KWU is made of food grade stainless steel AISI-304. The unit consists of four tanks for cleaning solutions on a single frame. Three tanks are insulated with rigid PU foam and heated with easily replaceable heating elements. The installation is closed from the outside with hoods made of food grade stainless steel AISI-304. The control system automatically executes the washing program for each of the streams, depending on the type of washing keg.

  1. Cleaning the keg from product remains.
  2. Rinsing with cold water.
  3. Blowing with compressed air.
  4. Washing with hot water. (No need for PET).
  5. Blowing with compressed air.
  6. Washing with hot alkaline solution.
  7. blowing with compressed air.
  8. Rinsing with cold water.
  9. Blowing with compressed air.
  10. Washing with acid solution. (No need for PET)
  11. Blowing with compressed air.
  12. Rinsing with cold water.
  13. Blowing with compressed air.
  14. Disinfection with a solution based on peracetic acid.
  15. CO2 blowing and shunting.
  1. Capacity: up to 24 metal kegs/hour.
  2. Capacity: up to 50 plastic kegs/hour.
  3. Number of loaded kegs: from 1 to 4 pcs.
  4. Number of detergent tanks: 4 pcs.
  5. Rated power supply voltage: 380V, 50Hz.
  6. Maximum power consumption: 8.5 kW.
  7. Permissible temperature in the tank: 85 °C.
  8. Maximum pressure in the automation air system: 8bar.
  9. Maximum pressure in the blowing system: 2bar.
  10. Maximum pressure in the CO2 filling system: 1.5bar.
  11. Maximum water inlet pressure: 4bar.
  12. Air consumption per keg: 100L/min.
  13. Overall dimensions (WxDxH): 2050x1100x1150mm.
  14. Weight: 455kg.
  1. Absolutely sterile and clean keg is The result of washing.
  2. No steam connection is required, so its negative impact is excluded: equipment wear, increased danger, coked remains of unwashed organic matter.
  3. The possibility of washing PET kegs.
  4. The possibility of simultaneous washing from 1 to 4 gigs.
  5. Fully automatic – you only need to connect the keg and disconnect after washing.
  6. The ability to select automatic washing programs considering changes in technological regulations.